104A	104
T104A	T104
C104A	C104
N104A	N104
L104A	L104

   Machine tap with spiral point, driving the chips ahead.
   5 thread chamfer lead (DIN-Form B).
   Rake angle 12° - 14°measured in the 3rd thread.

   L104A/L104: Total Length double as DIN standard

150A

   Machine tap with spiral point, fluteless tap,
      driving the chips ahead.
   5 thread chamfer lead (DIN-Form B).
   Rake angle 15° - 17°measured in the 3rd thread.
   For holes with thin walls, sheets, etc.
   Surface treatment: nitrided.

151A

   Machine tap with spiral point and coolant grooves,
      driving the chips ahead.
   5 thread chamfer lead (DIN-Form B).
   Rake angle 15° - 17°measured in the 3rd thread.
   Surface treatment: nitrided.

109A	109

   Machine tap with 12° left-hand spiral flutes,
      driving the chips ahead.
   5 thread chamfer lead (DIN-Form D).
   Rake angle 12° - 14°.

105A	105

   Machine tap with straight flutes,
   2.5 thread chamfer lead (DIN-Form C).
   Rake angle 12° - 14°.

135A	135

   Machine tap with straight flutes,
   Interrupted thread.
   2.5 thread chamfer lead (DIN-Form C).
   Rake angle 12° - 14°.

110A	110

   Machine tap with 15° right-hand spiral flutes,
      driving the chips to the back.
   3.5 thread chamfer lead (DIN-Form D).
   Rake angle 12° - 14°.

112A	112
T112A	T112
C112A	C112
N112A	N112
L112A	L112

   Machine tap with 38° right-hand spiral flutes,
      driving the chips to the back.
   Threaded length: 10 threads.
   Starting from the 5th thread, back tapered thread portion
      to reduce friction and improve swarf clearance.
   2.5 thread chamfer lead (DIN-Form C).
   Rake angle 12° - 14°.

   L112A/L112: Total Length double as DIN standard