www.gpsystem.com GP Group GP Location Map GP Enquiry Ferg Menu


  
 Machine Taps
 
 


  

    HIGH TECHNOLOGY
    Plain-carbon steel, Alloyed / tempered
       steel up to tensile strength 1,300 N/mm²
    Stainless steel, Spheroidal graphite,
    Malleable cast iron, Long-chiping
       aluminium and Copper alloys


T124A T124
W124A W124

   Machine tap with spiral point, driving the chips ahead.
   4-5 thread chamfer lead (DIN-Form B).
   Rake angle 8°÷10°measured in the 3rd thread.




W624A W624

   MACHINE TAP, WITH INTERNAL COOLANT FEED.
   Facilitates chip evacuation and improves cooling
      in cutting area.

   With spiral point, driving the chips ahead.
   4-5 thread chamfer lead (DIN-Form B).
   Rake angle 8°÷10°measured in the 3rd thread.




T122A T122
W122A W122

   Machine tap with 38° right-hand spiral flutes,
      driving the chips to the back.
   Threaded length: 10 threads.
   Starting from the 5th thread, back tapered thread
      portion to reduce friction and improve swarf clearance.
   2.5 thread chamfer lead (DIN-Form C).
   Rake angle 8°÷10°.




W622A W622

   MACHINE TAP, WITH INTERNAL COOLANT FEED.
   Facilitates chip evacuation and improves cooling
      in cutting area.

   Machine tap with 38° right-hand spiral flutes,
      driving the chips to the back.
   Threaded length: 10 threads.
   Starting from the 5th thread, back tapered thread
      portion to reduce friction and improve swarf clearance.
   2.5 thread chamfer lead (DIN-Form C).
   Rake angle 8°÷10°.





Home | GP Worldwide | Location | E-mail | MTC