www.gpsystem.com GP Group GP Location Map GP Enquiry HAMn Menu


HAM 385    Solid carbide twist drill
 
design features:
•  3 cutting edges with
      drillpoint
•  shank 1/8“ (3.175 mm)
•  OAL 1½“ (38.0 mm)
 

Ordering Number    30-1480 /  30-1481
  (TINALOX SN Coating)
d1 h7 mm d2 h6 mm l1 mm l2 mm l3 mm   d1 h7 mm d2 h6 mm l1 mm l2 mm l3 mm
0.500 3.175 38 7.00 6.00   1.600 3.175 38 10.50 8.50
0.500 3.175 38 8.50 7.50   1.700 3.175 38 10.50 8.00
0.550 3.175 38 7.00 6.00   1.800 3.175 38 10.50 8.00
0.550 3.175 38 8.50 7.50   1.900 3.175 38 10.50 8.00
0.600 3.175 38 7.00 6.00   2.000 3.175 38 10.50 8.00
                     
0.600 3.175 38 8.50 7.50   2.100 3.175 38 10.50 7.50
0.650 3.175 38 7.00 6.00   2.200 3.175 38 10.50 7.50
0.650 3.175 38 8.50 7.50   2.300 3.175 38 10.50 7.50
0.700 3.175 38 10.50 9.50   2.400 3.175 38 10.50 7.50
0.750 3.175 38 10.50 9.50   2.500 3.175 38 10.50 7.50
                     
0.800 3.175 38 10.50 9.50   2.600 3.175 38 10.50 7.00
0.850 3.175 38 10.50 9.50   2.700 3.175 38 10.50 7.00
0.900 3.175 38 10.50 9.00   2.800 3.175 38 10.50 7.00
0.950 3.175 38 10.50 9.00   2.900 3.175 38 10.50 7.00
1.000 3.175 38 10.50 9.00   3.000 3.175 38 10.50 6.50
                     
1.050 3.175 38 10.50 9.00   3.100 3.175 38 10.50 6.50
1.100 3.175 38 10.50 9.00   3.175 3.175 38 10.50 6.50
1.150 3.175 38 10.50 9.00            
1.200 3.175 38 10.50 9.00            
1.250 3.175 38 10.50 9.00            
                     
1.300 3.175 38 10.50 8.50            
1.350 3.175 38 10.50 8.50            
1.400 3.175 38 10.50 8.50            
1.450 3.175 38 10.50 8.50            
1.500 3.175 38 10.50 8.50            
We have the right to make technical changes.



Home | GP Worldwide | Location | E-mail | MTC