www.gpsystem.com GP Group GP Location Map GP Enquiry HAMn Menu


HAM 560
Solid carbide
stub reamers
with 3 cutting edges
and margins at each
cutting edge, with
interior coolant supply,
acc. HAM standard,
straight fluted		 [HAM 560]
design features:
chamfer: short
profile: standard
rake angle: 6°
chamfer 5°/45°
design as specified
acc. DIN 1420		 cutting material grade and applications:
Solid carbide
Reaming of exact holes, if a very high tool
life and very good surface finish is required,
e.g. for the manufacture in series or on
transfer lines.
Best drilling geometry, best economy.
Excellent hole quality with 10% and more oil in emulsion.
Successful application only for 10% and more oil emulsion.

Part No. d1 H7 mm d1 from...to
 mm		 d2 h6 mm l1 mm l2 mm l3 mm l4 mm
560-0800 8.00 7.51-8.50 16.00 120 12 18 25
560-0900 9.00 8.51-9.50 16.00 120 12 18 25
560-1000 10.00 9.51-10.60 16.00 120 12 18 25
560-1100 11.00 10.61-11.80 16.00 120 12 18 25
560-1200 12.00 11.81-12.50 16.00 120 12 18 25
560-1500 13-15 12.51-15.00 20.00 130 15 21 30
560-1800 16-18 15.01-18.00 20.00 130 15 21 30
560-2200 19-22 18.01-22.40 20.00 150 15 21 30
560-2600 24-26 22.41-26.50 25.00 150 15 21 30
560-3000 27-30 26.51-30.00 25.00 160 15 21 30
               
560-3500 31-35 30.01-35.50 25.00 160 18 27 35
560-4000 36-40 35.51-40.00 25.00 180 18 27 35

We have the right to make technical changes.


Home | GP Worldwide | Location | E-mail | MTC