GP SYSTEM (SINGAPORE) PTE LTD - HAM 3304 [Diamond solid carbide twist drill w/ PCD-tip]

HAM 3304 Diamond solid carbide twist drill w/ PCD-tip
DIN 6539, type N, cylindrical shank, right hand cut
*design features:* point grind: 4-facet ground point angle: 120° web thinned chisel edge: DIN 1412, form A side rake angle: 25° profile: standard	cutting material grade and applications: PCD-tip ultra micro grain Drilling of nonferrous metals and plastics, particularly suitable for carbon fibres; clean and accurate bore-holes, without delamination and fraying at the entry and bottom of the bore holes.

Part No.	d1 h7 mm	d2 h7 mm	l1 mm	l2 mm
3304-030	3.00	3.00	46	16
3304-031	3.10	3.10	49	18
3304-032	3.20	3.20	49	18
3304-033	3.30	3.30	49	18
3304-034	3.40	3.40	52	20

3304-035	3.50	3.50	52	20
3304-036	3.60	3.60	52	20
3304-037	3.70	3.70	52	20
3304-038	3.80	3.80	55	22
3304-039	3.90	3.90	55	22

3304-040	4.00	4.00	55	22
3304-041	4.10	4.10	55	22
3304-042	4.20	4.20	55	22
3304-043	4.30	4.30	58	24
3304-044	4.40	4.40	58	24

3304-045	4.50	4.50	58	24
3304-046	4.60	4.60	58	24
3304-047	4.70	4.70	58	24
3304-048	4.80	4.80	62	26
3304-049	4.90	4.90	62	26

3304-050	5.00	5.00	62	26
3304-051	5.10	5.10	62	26
3304-052	5.20	5.20	62	26
3304-053	5.30	5.30	62	26
3304-054	5.40	5.40	66	28

3304-055	5.50	5.50	66	28
3304-056	5.60	5.60	66	28
3304-057	5.70	5.70	66	28
3304-058	5.80	5.80	66	28
3304-059	5.90	5.90	66	28

3304-060	6.00	6.00	66	28
3304-061	6.10	6.10	70	31
3304-062	6.20	6.20	70	31
3304-063	6.30	6.30	70	31
3304-064	6.40	6.40	70	31

3304-065	6.50	6.50	70	31
3304-070	7.00	7.00	74	34
3304-075	7.50	7.50	74	34
3304-080	8.00	8.00	79	37
3304-085	8.50	8.50	79	37

3304-090	9.00	9.00	84	40
3304-095	9.50	9.50	84	40
3304-100	10.00	10.00	89	43
3304-105	10.50	10.50	89	43
3304-110	11.00	11.00	95	47

3304-115	11.50	11.50	95	47
3304-120	12.00	12.00	102	52
3304-127	12.70	12.70	102	52
3304-140	14.00	14.00	107	54
3304-160	16.00	16.00	115	58
3304-200	20.00	20.00	131	66

We have the right to make technical changes.

Home | GP Worldwide | Location | E-mail | MTC