www.gpsystem.com GP Group GP Location Map GP Enquiry HAMn Menu


HAM 3641
Diamond
countersink
2 cutting edges, shank
with clamping thread,
right hand cut, with
interchangeable pilot		 [HAM 3641]
The following insert tools are not included in delivery:
[HAM 3641] special diamond twist drill
with 2 PCD edges HAM 3270
[HAM 3641] interchangeable point
design features:
point grind:
2-facet ground
point angle: acc.
your order
side rake angle: 0°
profile: straight
fluted		 cutting material grade and applications:
PCD cutting edges (ultra micro grain)
For countersinking of carbon fibre materials
aluminium with partial silicium and other
non ferrous materials.

Part No. d1
mm		 d2 h7 mm D ±q1 mm l1 mm d3
mm
3641-0200 2.00 2.00 12.7 28 M 6x1
3641-0238 2.38 2.00 12.7 28 M 6x1
3641-0250 2.50 2.00 12.7 28 M 6x1
3641-0285 2.85 2.50 12.7 28 M 6x1
3641-0300 3.00 2.50 12.7 28 M 6x1
           
3641-0317 3.17 2.50 12.7 28 M 6x1
3641-0350 3.50 3.175 12.7 28 M 6x1
3641-0400 4.00 3.175 12.7 28 M 6x1
3641-0417 4.17 3.175 12.7 28 M 6x1
3641-0476 4.76 3.175 12.7 28 M 6x1
           
3641-0483 4.83 3.175 12.7 28 M 6x1
3641-0500 5.00 3.175 12.7 28 M 6x1
3641-0560 5.60 3.175 12.7 28 M 8x1
3641-0600 6.00 3.175 15.0 28 M 8x1
3641-0635 6.35 3.175 15.0 28 M 8x1
           
3641-0800 8.00 6.00 15.0 28 M 8x1
3641-0952 9.52 6.00 21.0 28 M 8x1
3641-1000 10.00 6.00 21.0 28 M 8x1

We have the right to make technical changes.


Home | GP Worldwide | Location | E-mail | MTC