. . . flexible
ISO-cartridges offer an utmost degree of flexibility
in the design of customer specific tool solutions.
Particularly large tool diameters can be produced pricewise economically
due to the relatively easy assembly of cartridges
while the basic holders are made of aluminium or untempered
steel. This design in many cases reduces weight and primarily
costs. Any inaccuracies that might occur can easily be
compensated by means of the
radial and axial adjustment of
the cartridges.
The HOLLFELDER cartridges
differ from the competition
particularly in the way the
radial adjustment is achieved
whereas dimensions are also
according to ISO-DIN.
Contrary to other ISO DIN-cartridges with adjustment by
radial screw or by a timeconsuming underlaying procedure, the machining diameter of Hollfelder cartridges is adjusted in
a convenient and highly precise way by means fo a tapered
screw.
The advantages:
Both cartridge and insert remain solidly fixed in the basic
holder respectively in the pocket seat during the adjustment
operation, the angle position of the insert remains unchanged
which is particularly of advantage for machining 90° shoulders.
This type of assembly guarantees the best possible stability of
the connection holder-cartridge.
Internal machining tools satisfying highest requirements in
precision and quality can thus be produced with cartridges of
HOLLFELDER CUTTING TOOLS starting at a bore diameter of
20 mm already.
![[Hollfelder Cutting Tools]](hhlogo2.gif)
![[Hollfelder Cutting Tools]](cartridges.jpg)
![[Hollfelder Cutting Tools]](carsolution1.gif)
![[Hollfelder Cutting Tools]](carsolution2.gif)
