Toolholders with HSK-tapers shank DIN 69893-1
                                                               

Adaptors for end mills with thread shank


Concentricity from the taper to the holding part < 0.005

Base-body balanced, G 2.5 - 20,000 r.p.m.

Special executions on inquiry

Delivery without tool
       HSK - A        
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
       HSK - A 63       
 Art.-Nr. Type D1 M NL D D2
 63.11.06.025 HSK-A63xM  6x  25 63 6 25 9.7 10
 63.11.06.050 HSK-A63xM  6x  50 63 6 50 9.7 20
 63.11.06.075 HSK-A63xM  6x  75 63 6 75 9.7 23
 63.11.06.100 HSK-A63xM  6x100 63 6 100 9.7 25
 
 63.11.08.025 HSK-A63xM  8x  25 63 8 25 13 15
 63.11.08.050 HSK-A63xM  8x  50 63 8 50 13 23
 63.11.08.075 HSK-A63xM  8x  75 63 8 75 13 23
 63.11.08.100 HSK-A63xM  8x100 63 8 100 13 25
 
 63.11.10.025 HSK-A63xM10x  25 63 10 25 18 20
 63.11.10.050 HSK-A63xM10x  50 63 10 50 18 25
 63.11.10.075 HSK-A63xM10x  75 63 10 75 18 28
 63.11.10.100 HSK-A63xM10x100 63 10 100 18 30
 
 63.11.12.025 HSK-A63xM12x  25 63 12 25 21 24
 63.11.12.050 HSK-A63xM12x  50 63 12 50 21 24
 63.11.12.075 HSK-A63xM12x  75 63 12 75 21 31
 63.11.12.100 HSK-A63xM12x100 63 12 100 21 31
 63.11.12.150 HSK-A63xM12x150 63 12 150 21 36
 63.11.12.200 HSK-A63xM12x200 63 12 200 21 36
 
 63.11.16.025 HSK-A63xM16x  25 63 16 25 29 34
 63.11.16.050 HSK-A63xM16x  50 63 16 50 29 34
 63.11.16.075 HSK-A63xM16x  75 63 16 75 29 34
 63.11.16.100 HSK-A63xM16x100 63 16 100 29 39
 63.11.16.150 HSK-A63xM16x150 63 16 150 29 39
 63.11.16.200 HSK-A63xM16x200 63 16 200 29 39

       HSK - F        
 
 
  
       HSK - F 63       
 Art.-Nr. Type D1 M NL D D2
 63.13.10.050 HSK-F63xM10x  50 63 10 50 18 25
 63.13.10.075 HSK-F63xM10x  75 63 10 75 18 28
 
 63.13.12.050 HSK-F63xM12x  50 63 12 50 21 24
 63.13.12.075 HSK-F63xM12x  75 63 12 75 21 31
 
 63.13.16.050 HSK-F63xM16x  50 63 16 50 29 34
 63.13.16.075 HSK-F63xM16x  75 63 16 75 29 34
 




We reserve the right to make technical changes.