www.gpsystem.com GP Group GP Location Map GP Enquiry Ott+Heugel Menu


[OTT+HEUGEL]OTT+HEUGEL KnivesOTT+HEUGEL Knives

Duracut
Duracut

The DuraCut® product line is the classical
Circular Knives programme offered by
OTT+HEUGEL. The knives are available
in different steel qualities like HSS/DMo5,
HSS-E/EMo5Co5 and various tool steels.
Surface treatments and coatings depending
on the applications are also available.
All Circular Knives will be produced for
customers special application from
diameter 50 mm up to 570 mm.

Typical applications are edging, trimming, length and cross
cutting of paper, cardboard materials, plastics, rubber, leather,
plasters and bandaging material, textiles, fitted carpeting, floor
coverings and wire gauzes.

Quality: HSS, HSS-E, Tool steel, Powder steel
Coating: CLASSIC, CONCEPT, ADVANTAGE, SPORTIVE, EVOLUTION

DuraCut® Circular Knives are available in
the following materials:

Material Standard No. Hardness
1.3343   HSS/DMo5 58-63 HRC
1.3243   HSS-E/EMo5Co5 58-63 HRC
1.3355   S 18-0-1 55-63 HRC
1.2080   X 210 Cr12 55-62 HRC
1.2379   X 155 CrVMo121 55-62 HRC

DuraCut® Circular Knives -- application
according to OTT+HEUGEL standards

Execution Standard Application Material
double bevel form 11
[Form 11]		 paper tubes hydraulic tubes 1.3343, 1.2080
single bevel form 12
[Form 12]		 paper, corrugated board, foils 1.3343, 1.2379
double bevel with single bevel form 15
[Form 15]		 thick-walled tubes made of different materials 1.3355, 1.3243

DuraCut® a registered brand name of the OTT+HEUGEL company



Carbocut
Carbocut

The CarboCut® Circular Knives are supplied
in high premium Solid Carbide quality. 

For standard application grade G20 will be
used. These Circular Knives are designed
for high precision automatic cutting lines
and wherever tight tolerances are required.
The Knives are manufactured from diameter
50 mm up to 300 mm. Different coatings
are also available. Typical applications are
for the automotive and electronic industries.

Quality: Solid carbide     Material: G20 / G30
Coating: CLASSIC, CONCEPT, TEFLON


CarboCut® Circular Knives -- application
according to OTT+HEUGEL standards

Execution Standard Application
double bevel with single bevel form 15
[Form 11]		 paper and corrugated board industry
double bevel with single bevel and teeth form 45 hydraulic tubes
single bevel with
pre-grind		 form 16
[Form 16]		 electronic industry

CarboCut® a registered brand name of the OTT+HEUGEL company



Ceramcut
Ceramcut

CeramCut - high precision cutting tools made
of ceramic - is the latest development made
by OTT+HEUGEL. These tools are individual
solutions and are characterised by their
extreme high mechanical hardness and wear
resistance. The basic materials are different
selections of oxides, carbides, etc. These
tools are supplied up to a maximum diameter
of 200 mm.
Quality: Ceramics     Coating: CLASSIC


Home | GP Worldwide | Location | E-mail | MTC