For mounting of solid carbide and HSS-cutters acc. DIN 6353
form HA. Ideal for use of tools without coolant supply as well
as machining of difficult areas with bad chip disposal.
Induction shrink chucks are made of heat-resistant tool steel,
with long service life and high strength. The shrink-in and
shrink-out process can be repeated as often as desired.
Induction shrink chucks guarantee clamping force and
elasticity.
Suitable for hot air and induction.
Technical features: • two borings in the wall of the shrink chuck lead the coolant directly to the tool cutting edge • due to the inclined exit of the coolant borings the coolant is leaded to the tool cutting edge, even under high rotation • When milling in pockets, or the like, the strong and directly to the machining area aiming coolant stream washes away the chips • shrink-fitting of carbide HM and HSS tools possible • shrink-in time max. 8 seconds
Customer advantage: • closeable with threaded pin • high temperatures in the bore only • no heating of the taper • cooling unit integrated in the shrink device
Tool group A39 Type 293-15 Induction shrink chucks with positive taper lock system as per DIN 69893-1 HSK A "COOL TOOL"
Item_no.
Mount HSK
Clamping Ø
d2
d3
I1
Weight
1063644
A 63
6
21
27
80
900
1063645
A 63
8
21
27
80
900
1078785
A 63
6
21
27
160
1300
1078786
A 63
8
21
27
160
1300
1063646
A 63
10
24
32
85
900
1063647
A 63
12
24
32
90
1000
1078787
A 63
10
24
32
160
1600
1078788
A 63
12
24
32
160
1500
1063648
A 63
14
27
34
90
1000
1063649
A 63
16
27
34
95
1000
1078789
A 63
14
27
34
160
1600
1078790
A 63
16
27
34
160
1600
1063650
A 63
18
33
42
95
1200
1063651
A 63
20
33
42
100
1200
1078791
A 63
18
33
42
160
1900
1078792
A 63
20
33
42
160
1800
1063652
A 63
25
44
53
115
1800
1078793
A 63
25
44
53
160
2500
We have the right to make technical changes.
Tool group A39 Type 293-15 Induction shrink chucks with steep taper shank as per DIN 69871 form AD + B "COOL TOOL"
