GP SYSTEM (SINGAPORE) PTE LTD - ROHM [Product 1: Reducing Sleeves RH DIN 2185]

RH Reducing Sleeves DIN 2185
for tools with morse tapers

type 261
standard version similar to DIN 2185, ground external taper
type 262
precision version DIN 2185, completely hardened, ground
internally and externally
type 263¹⁾
with internal cones reduced by the length of the tang.
ground external taper

_{external taper MT}	_{internal taper MT}	_{type-261 Part No.}	_{type-262 Part No.}	_{type-263 Part No.}	_L	_{weight approx.}
1	0	017002	017017	017032	80	30 g
2	1	017003	017018	017033	92	95 g
3	2	017004	017020	017034	112	190 g
3	1	017001	017019		99	250 g
4	3	017007	017023	017035	140	360 g
4	2	017006	017022		124	480 g
4	1	017005	017021		124	550 g
5	4	017011	017027	017036	171	950 g
5	3	017010	017026		156	1360 g
5	2	017009	017025		156	1520 g
5	1	017008	017024		156	1700 g
6	5	017016	017031	017037	218	2550 g
6	4	017015	017030		218	3600 g
6	3	017014	017029		218	4100 g
6	2	017013	017028		218	4300 g
¹⁾ For use with spiral drills with broken off flat tang. The broken off shaft is provided with a new flat tang. The drill shortened in this way can then be re-used and later ejected.

type 274
with forcing nuts completely hardened
ground internally and externally

_{external taper MT}	_{internal taper MT}	_{type-274 Part No.}	_L	_{weight approx.}
2	1	032112	95	140 g
3	2	032114	115	270 g
3	1	032113	115	360 g
4	3	032117	137	470 g
4	2	032116	137	590 g
4	1	032115	137	670 g
5	4	032121	173	1270 g
5	3	032120	173	1590 g
5	2	032119	173	1750 g
6	5	032126	240	3020 g
6	4	032125	240	4110 g
6	3	032124	240	4630 g

DIN 317 - Ejectors

type 266-00
Taper drift

_{for MT}	_{Part No.}	_Length	_{weight approx.}
0	017075	90	14 g
1+2	017076	140	70 g
3	017077	190	150 g
4	017078	225	310 g
5+6	017079	265	650 g

type 266-50
Taper drift for one-hand-operation

_{for MT}	_{Part No.}	_Length	_{weight approx.}
1-3	317236	320	320 g
4-6	317258	380	520 g

Home | GP Worldwide | Location | E-mail | MTC