www.gpsystem.com GP Group GP Location Map GP Enquiry


  

Where production processes that require cleaning or deoiling,
we are the right choice.
Recycling instead of high disposal costs as well as cost
reductions through more effective cleaning.

Cooling Lubricant Preparation (Centrifugal System)

The Problem:
Our Solution:

With modern, highly productive
processing machines, down
times give rise to enormous
costs.

The fine abrasion (sludge)
created by mechanical machining
leads to high tool wear.

Renewal of the cooling lubricants
is unavoidable.

Centrifuges guarantee the optimal state of
the cooling lubricant.
Separation of oil and solid material from the
emulsion with the 3-phase centrifuge.
Separation of solid material from the cooling
lubricant with the 2-phase centrifuge.
The solid material dried at maximum speed
(patented) can be disposed of with the swarf -
avoidance of special waste.
These centrifuges can be optionally equipped
with suction units in order additionally to suck
the cooling lubricant from the tank of the
processing machine and to clean the tank.

Our Advantages:

No filter required
Remove up to particle size of 3 µm
No staging needed for the used coolant




Tornado Series 200 / 300 / 400


      

 Tornado  200 Z  200 RT  200 TRT  300 RT  300 TRT  400 RT  400 TRT

 Drive power kW

 2.2

 2.2

 2.2

 3

 3

 4

 4

 Rotor Speed rpm

 3000

 3900 / 4300

 3900 / 4300

 3000 / 3500

 3000 / 3500

 2500 / 3000

 2500 / 3000

 Solid material volume dm3

 3

 3

 3

 8

 8

 12

 12

 Separation factor g

 980

 1700 / 2070

 1700 / 2070

 1500 / 2050

 1500 / 2050

 1400 / 2010

 1400 / 2010

 Throughput l/min

 60

 60

 10-15

 120

 15-20

 150

 15-20

 RT= 2-phase separation · TRT= 3-phase separation
All centrifuges can be supplied with suction unit and feed tank
Please contact us for customized solutions.



Home | GP Worldwide | Location | E-mail | MTC