GP SYSTEM (SINGAPORE) PTE LTD - ZOLLER

Traveling range:     Measuring range:
Z-axis 600 mm        Length Z-axis 570 mm
X-axis 175 mm        Radius X-axis 170 mm
Y-axis 100 mm        Diameter 340 mm

Repeat accuracy: 0.002mm
Setting accuracy: < 2µm
Display accuracy: 0.001mm
Positioning accuracy: 0.001mm
Concentric accuracy: 0.002mm

Tool dimensions (2D):
Diameter-snap gauge
     principle: 0.1 - 100 mm
Diameter: 0.1 - 340 mm
Length: 0 - 600 mm

Tool dimensions (3D):
Clearance angle-circumference
     up to D 200 mm
Land width-circumference
     up to D 200 mm
Rake angle / groove depth
     up to D 75 mm
Front geometry
     up to Z 470 mm
     up to D 230 mm
     up to step< 35 mm

   * Pneumatic slide clamping for three axes, electronic infinite micro-adjustment and
      one-hand operating handle.
   * Heidenhain measuring systems in five axes, bellow cover. Membrane keyboard
      to clamp and release all power-operated functions of the tool holding fixture.
   * CNC-control in four axes, positioning accuracy 0.001 mm linear and 0.01 degree
      in B-axis. Solid protection shell and vibration reducing base.
   * Inherent stability and torsion free structure by means of design elements.
      Separate peripheral column for monitor, keyboard, adapter toolposts and printer.

	»saturn 3«-Image processing technology 2D 1:1 Camera with telecentrical objective and 50-fold magnification. Software for automatic measuring of any tools and tool cutting edges, fully automatic identification of the cutting edge shape, CNC-controlled measuring slide adjustment and fully automatic measuring cycles with »saturn 2«-measuring programs facilitated by photo-realistic input dialogue. 15“ TFT display, operating system Windows XP®, US-version (English)

	Universal high precision spindle »A.C.E.«/Autofocus/ROD High precision spindle universal with quick change device for adapter toolposts and with universal power clamping. Changing accuracy 0.001 mm. Automatic focusing and zero point calibration. Rotation generator for 3rd axis.

	Measuring Programs »antila« Measuring programs for »saturn 3« image processing technology to measure clearance angles, helicial pitch, helical angle, groove depth, core diameter, clearance angle 1 and 1 at circumference, pitch differential, chamfer width, face clearance angle 1 and 2, face chamfer breath, orthogonal clearance an-gle and off-center.

	Electronics »saturn 3«/genius “D” Graphic operating screen under Windows®, adapter management for 999 zero points, tool management for at least 15,000 tools. Tolerance check for X/Z-measuring values. Radius, diameter or differential dimension modes for both axes can be selected independently. Pentium 4-computer with at least 2.4 GHz, 512 MB main memory, 2 Centronics, 6 interfaces V24 and 4 interfaces USB 2.0, thereof 2 available from the front, disc drive with 3.5”, DVD-RW drive for backup and harddisc with at least 40 Gbyte. 15”-TFT colour display with dual operating touch and keyboard. Operating system Windows® XP-Professional, US-version (English), Power factor (PF) corrected power unit.

	Wobble compensation »sigma« Measuring program to determine concentricity error and theoretical centre line with compensation of measuring result during data output, available for 3-axis-version. Available for »saturn 1/2/3«-technology.

	Incident light measuring »metis 3D« Software for visual expertise and measuring by incident light. Available functions: printing, zooming, storing, distance-, radius- and angle measurement.

	Software grinding wheels »corvus« To manage grinding wheels and grinding components. Grinding wheel packages are created by means of automatic generation of drawings. Measuring of wheels or packages.

	Radii-contour line measurement »contour« Software for measurement of radius tools. Graphic output of the contour with tolerance range. Identification of the biggest inner and outer deviation. Transition check.

	Contour Line Measuring-»lasso« »lasso«function« to scan any rotationally symmetrical tool- or work piece contours. Autofocus recommended.

	Contour Line Measurement Incident Light »lasso (a)« Fully-automatic contour tracing by incident light via »genius«-3D-camera for maximum 250 pictures per measuring run. Illumination calibration and search run to produce high- definition pictures for slanted objects in space. Manual setting of start and end point. Photo-realistic input dialogue. Condition for contour tracing and calculation is edge course with sufficient light/dark shading. Edge roundings and flat change-overs may influence functionality and precision in a negative way.

	Drawing Generator »sinope« From measurement to the dimensioned drawing. Software for automatic generation of a dimensioned tool drawing taken from the measured actual dimensions of the tool/of tool steps.

	Graphic Manager and Generator »pictor« Software for the management of graphic single components and parts lists, in order to generate drawings of complete tools from component drawings automatically. A graphic package containing more than 150 drawings for complete tools and components included in price. Graphic interpreter for DXF (AutoCAD 10.0), BMP, PNG, WMF, EMF, TGA, TIF and JPG.

	Data Output "Grinding Machine" (XML format) Basically ZOLLER-measuring machines »genius« are capable of outputting in the network all measured parameters to be processed further. Data output is carried out according to XML instructions. The measured data are available to the grinding machine's manufacturer for further use in its grinding machine's control. The measured parameter are for example tool length and idameter, chamfer angle, chamfer breadth, chamfer length, corner radius, ball nose radius, cone angle, helical angle, helical pitch, axial angle, hollow angle, rake angle, face rake angle, draft angle 1 and 2 at cirumference, face draft angle 1 and 2, groove depth, radial chamfer breadth, division tolerance, axial run-out, concentricity, step lengths, step diameter, cylindricity. Installation and commissioning according to the valid installation rates, customer-specific adaptations will be invoiced according to the time needed.

	Adapter Toolpost Expansion Chuck D 32/size I (Autom.) Expansion chuck D 32 mm, automatic clamping of tools. Suitable for Nikken reduction sleeves. Loss in measuring range 113 mm in Z-axis. Reduction Sleeve D 32/d 6 - d 25 Slotted, for expansion chuck with locating diameter 32 mm, D 6/8/10/12/14/16/18/20/25. Other sizes are available on request.

	Wooden board D 32.5 For change bushes D 32/d

	Printer for TH-labels 230 V (D) Printer for special thermal-adhesive labels in plain text and barcode. Centronics-interface, print space 56 mm, maximum printing length 279 mm.

	Printer "Lists/Graphics" 230 Volt Laser-printer with LED printing technology for test logs

	Support for Collet Chuck Turning turret made of plexiglass for collet chucks outer diameter D 32 mm. 15 inserts.

We have the right to make technical changes.

Home | GP Worldwide | Location | E-mail | MTC