Measuring range diameter 3 to 32 mm. Inductive shrink-clamping device, “stand-alone” solution. For HSS and carbide (HM) tools. Loading time less than 5 seconds. Induction coil with 10 kW capacity. Version for 1 tool holding fixture.

Technical Data:    Performance: 10 kW    Diameter: HM = D 3 - 32 mm                     HSS = D 3 - 32 mm    Shrinking time: <= 5 seconds    Cooling time: < 30 seconds

    Inductor coil and cooling bell are designed for standardized shrinking chuck according to DIN 69882-8.
Deviations from that require changes on the »powershrink« technology and will result in additional costs.

Options + Accessories •  Locating holder for tools    Locating holder for 1 tool each. Versions available for tools ISO40 / ISO50 / HSK32 / HSK40 / HSK50 / HSK63 /  HSK80 / HSK100.  Please indicate version in your order. •  Cooling Device    High speed cooling device including 5 cooling adapters for high speed cooling within 30 seconds •  Trolley    Trolley for ZOLLER-»powerShrink«, cooling device may also be put onto the trolley

Measuring range diameter 3 to 32 mm. Luxury inductive shrinking device for HSS- and HM-tools. Loading time less than 5 seconds. Induction coil with 10 kW capacity. Rotary disk for 3 tool holding fixtures.

Technical Data:    Performance: 10 kW    Diameter: HM = D 3 - 32 mm                     HSS = D 3 - 32 mm    Shrinking time: <= 5 seconds    Cooling time: < 30 seconds

Highspeed-cooling device including 5 cooling blocks for highspeed cooling
within 30 seconds. Tool holder to deposit the tools to be shrunk.                  

Work bench combination with plate 1500 x 800 mm made from hard laminate
42 mm. Drawer cabinet con-taining a total of 4 drawers, 75 mm high, 125 mm
and 2 x 200 mm, including inserts to locate various tool holders.   Work bench
is also designed to accept refrigerating set.                                                        

Inductor coil and cooling bell are designed for standardized shrinking chuck according to DIN 69882-8.
Deviations from that require changes on the »powershrink« technology and will result in additional costs.

Options + Accessories •  Locating Holder for Rotary Disk (Spider)    Locating holder for rotary disk for maximum location of 3 tools each. Available for steep taper ISO 30,  ISO 40 and ISO 50 as well as HSK 32 to HSK 100. (Please indicate tool holding fixture in your order.) •  Flue Gas Suction Device »redomatic« and »powerShrink«    Flue gas suction device for »redomatic« and »power-shrink« 10kW-version to remove flue gas generated  during shrink-clamping. Flue gas suction device includes pre-liminary filter, ionizer and collector chamber  for industrial use. Dimension approx. 1210 x 800 x 900 mm (LxBxH). •  Water cooling system (comfort version)    For even more rapid cooling times thanks to higher ca-pacitiy. Low noise level and transformer to be used  world-wide. (Additional price instead of standard version) •  Cooling Adapter - Special Version    Adapter for not standardized shrink-clamping fixtures or special chucks. Change insert Ø 14 - 16 (size I),  Ø 25 - 32 (size II), Ø 40 - 50 mm (size III). State size in your order. •  Two-Piece Stop Disk    Two-piece type for fixture of tools, of which the cutting diameter is larger than the shank diameter. •  Stop Disk Special Model    Special model of stop disks for non-standard shrinking chuck. For model of stop disk a construction drawing  of the shrinking chuck is necessary.

We have the right to make technical changes.

Home | GP Worldwide | Location | E-mail | MTC