//
// Copyright (c) 2006 by Conor O'Mahony.
// For enquiries, please email GubuSoft@GubuSoft.com.
// Please keep all copyright notices below.
// Original author of TreeView script is Marcelino Martins.
//
// This document includes the TreeView script.
// The TreeView script can be found at http://www.TreeView.net.
// The script is Copyright (c) 2006 by Conor O'Mahony.
//
// You can find general instructions for this file at www.treeview.net.
//

USETEXTLINKS = 1
STARTALLOPEN = 0
USEFRAMES = 0
USEICONS = 0
WRAPTEXT = 1
PRESERVESTATE = 1
ICONPATH = "../treeview/";


foldersTree = gFld("<img src='cnc041.jpg' border=0>", "")
  foldersTree.treeID = "Cnc04"
  aux1 = insFld(foldersTree, gFld("Change Holder", "cnc/holder13.htm"))    
  aux2 = insFld(foldersTree, gFld("Floating Holder", "cnc/holder14.htm"))    
  aux3 = insFld(foldersTree, gFld("Rotary Stop", "cnc/cnc01.htm"))    
  aux4 = insFld(foldersTree, gFld("Die Housing Insert", "cnc/cnc03.htm"))    
  aux5 = insFld(foldersTree, gFld("Auto Tapper", ""))
      insDoc(aux5, gLnk("S", "with Pos. Differential", "cnc/cnc02.htm"))
      insDoc(aux5, gLnk("S", "with Cylindric Shaft", "cnc/cnc04.htm"))    
  aux6 = insFld(foldersTree, gFld("Quick Locking Drill Chuck", "cnc/cnc05.htm"))    
  aux7 = insFld(foldersTree, gFld("Driver Centering Point", "cnc/cnc06.htm"))   
  aux8 = insFld(foldersTree, gFld("Blind Tooling Bore", "cnc/cnc07.htm")) 
  aux9 = insFld(foldersTree, gFld("Cut Off Tools", ""))
      insDoc(aux9, gLnk("S", "Right", "cnc/cutoff01.htm"))
      insDoc(aux9, gLnk("S", "Left", "cnc/cutoff02.htm"))    
      insDoc(aux9, gLnk("S", "Adj Height Right", "cnc/cutoff03.htm"))
      insDoc(aux9, gLnk("S", "Adj Height O/head Right", "cnc/cutoff04.htm"))    
      insDoc(aux9, gLnk("S", "Adj Height Left", "cnc/cutoff05.htm"))