Toolholders with HSK-tapers shank DIN 69893-1
                                                               

Reducing adaptors MT DIN 228 form B with tang


Concentricity from the taper to the holding part < 0.005

Base-body balanced, G 2.5 - 8,000 r.p.m.
       HSK - A        
 
  
       HSK - A 63       
 Art.-Nr. Type D1 A MK D
 63.11.01.5 HSK-A63xMK1x100 63 100 1 25
 63.11.02.5 HSK-A63xMK2x120 63 120 2 32
 63.11.03.5 HSK-A63xMK3x140 63 140 3 40
 63.11.04.5 HSK-A63xMK4x160 63 160 4 48
 
 
 

       HSK - F       
 
  
       HSK - F 63       
 Art.-Nr. Type D1 A MK D
 63.13.01.5 HSK-F63xMK1x100 63 100 1 25
 63.13.02.5 HSK-F63xMK2x120 63 120 2 32
 63.13.03.5 HSK-F63xMK3x140 63 140 3 40
 63.13.04.5 HSK-F63xMK4x160 63 160 4 48
 
 
 


Reducing adaptors MT DIN 228 form A with retention thread


Concentricity from the taper to the holding part < 0.005

Base-body balanced, G 2.5 - 8,000 r.p.m.
       HSK - A        
 
  
       HSK - A 63       
 Art.-Nr. Type D1 A MK D
 63.11.01.55 HSK-A63xMK1x100 63 100 1 25
 63.11.02.55 HSK-A63xMK2x120 63 120 2 32
 63.11.03.55 HSK-A63xMK3x140 63 140 3 40
 63.11.04.55 HSK-A63xMK4x165 63 165 4 48
 
 
 





We reserve the right to make technical changes.