ISO Taper-toolholders
                                                                          

CNC-Drill chucks for clockwise and anti-clockwise rotation


Taper angle AT3, Concentricity from the taper to the
holding part < 0.04

Base-body balanced, G 2.5 - 8,000 r.p.m.
       DIN 69871       
 Art.-Nr. Type A d D
 30.01.08 SK30x1 - 8x70 70 1 - 8 36
 30.01.13 SK30x1-13x90 90 1-13 50
 
 40.01.13 SK40x1-13x90 90 1-13 50
 40.01.16 SK40x3-16x90 90 3-16 57
 40.01.13k SK40x1-13x90-AD+B 90 1-13 50
 40.01.16k SK40x3-16x90-AD+B 90 3-16 57
 
 50.01.13 SK50x1-13x90 90 1-13 50
 50.01.16 SK50x3-16x90 90 3-16 57
 50.01.13k SK50x1-13x90-AD+B 90 1-13 50
 50.01.16k SK50x3-16x90-AD+B 90 3-16 57
       MAS BT       
 Art.-Nr. Type A d D
 30.05.08 BT30x1 - 8x  73 73 1 - 8 36
 
 
 40.05.13 BT40x1-13x  98 98 1-13 50
 40.05.16 BT40x3-16x  98 98 3-16 57
 40.05.13k BT40x1-13x  98-AD+B 98 1-13 50
 40.05.16k BT40x3-16x  98-AD+B 98 3-16 57
 
 50.05.13 BT50x1-13x108 108 1-13 50
 50.05.16 BT50x3-16x108 108 3-16 57
 50.05.13k BT50x1-13x108-AD+B 108 1-13 50
 50.05.16k BT50x3-16x108-AD+B 108 3-16 57


Drill chuck arbors DIN 238


Taper angle AT3, Concentricity from the taper to the holding part < 0.005
       DIN 69871       
  Art.-Nr. Type A B D
 30.00.12.8 SK30xB12 15 12 43
 30.00.16.8 SK30xB16 17 16 50
 
 40.00.12.8 SK40xB12 15 12 43
 40.00.16.8 SK40xB16 17 16 50
 
 50.00.16.8 SK50xB12 20 16 50
 50.00.18.8 SK50xB16 20 18 56
       MAS BT       
  Art.-Nr. Type A B D
 30.05.12.8 BT30xB12 26 12 43
 30.05.16.8 BT30xB16 27 16 50
 
 40.05.12.8 BT40xB12 43 12 43
 40.05.16.8 BT40xB16 44 16 50
 
 50.05.16.8 BT50xB12 43 16 50
 50.05.18.8 BT50xB16 43 18 56


Drill chucks






                                          The drill chuck has to be ordered separately !
       Type B12       
  Art.-Nr. Type
 287100 B12xø0.5-10x80  
 
 
       Type B16       
  Art.-Nr. Type
 289100 B16xø1.0-13x90  
 290100 B16xø2.5-16x95  
 




We reserve the right to make technical changes.