40-5860

40-5860	40-6080	HAM 422	HAM 463/464	HAM 424/428
40-5880	40-6090	HAM 429	40-5920	HAM 469

HAM 40-5860 solid carbide ball nose end mill

   Engineering data
   • especially suitable for form copying
      of deep contours
   • centre cutting
   • radius form tolerance 0.01

   The current production will be
   changed to the version with MMP

    MMP from Ø d1 0.5 mm

Material
40-5860
very suitable limited suitable

Ø d1 (0/-0.01) mm	l2 mm	l3 mm	Ø d3 mm	l1 mm	Ø d2 (h6) mm	Ø d1 (0/-0.01) mm	l2 mm	l3 mm	Ø d3 mm	l1 mm	Ø d2 (h6) mm
0.2	0.3	0.5	0.18	55	4	1.5	2	18	1.44	55	4
0.2	0.3	1	0.18	55	4	1.5	2	24	1.44	60	4
0.2	0.3	1.5	0.18	55	4	2	2.5	6	1.92	65	4
0.3	0.45	1	0.28	55	4	2	2.5	10	1.92	65	4
0.3	0.45	2	0.28	55	4	2	2.5	14	1.92	65	4

0.3	0.45	3	0.28	55	4	2	2.5	18	1.92	65	4
0.4	0.6	2	0.37	55	4	2	2.5	24	1.92	75	4
0.4	0.6	3	0.37	55	4	2	2.5	30	1.92	75	4
0.4	0.6	4	0.37	55	4	2.5	3.5	10	2.4	65	4
0.5	0.7	3	0.47	55	4	2.5	3.5	20	2.4	65	4

0.5	0.7	5	0.47	55	4	2.5	3.5	30	2.4	75	4
0.5	0.7	8	0.47	55	4	3	5	6	2.9	65	4
0.6	0.9	3	0.57	55	4	3	5	10	2.9	65	4
0.6	0.9	5	0.57	55	4	3	5	14	2.9	65	4
0.6	0.9	8	0.57	55	4	3	5	18	2.9	65	4

0.8	1.1	4	0.76	55	4	3	5	24	2.9	75	4
0.8	1.1	6	0.76	55	4	3	5	30	2.9	75	4
0.8	1.1	8	0.76	55	4	4	6	10	3.9	65	6
0.8	1.1	10	0.76	55	4	4	6	14	3.9	65	6
1	1.5	6	0.95	55	4	4	6	18	3.9	65	6

1	1.5	10	0.95	55	4	4	6	24	3.9	75	6
1	1.5	14	0.95	55	4	4	6	30	3.9	75	6
1	1.5	18	0.95	55	4	5	7.5	10	4.9	65	6
1	1.5	24	0.95	60	4	5	7.5	20	4.9	65	6
1.2	1.6	6	1.15	55	4	5	7.5	30	4.9	75	6

1.2	1.6	10	1.15	55	4	5	7.5	40	4.9	90	6
1.2	1.6	14	1.15	55	4	6	10	12	5.9	65	6
1.2	1.6	18	1.15	55	4	6	10	20	5.9	65	6
1.2	1.6	24	1.15	60	4	6	10	30	5.9	75	6
1.5	2	6	1.44	55	4	6	10	40	5.9	90	6

1.5	2	10	1.44	55	4	6	10	50	5.9	90	6
1.5	2	14	1.44	55	4

We reserve the right to make technical changes.