Grooving and Boring |
Toolholder | B105 with through coolant supply |
||||
Bore Ø from Depth of groove Width of groove up to |
0.2 mm 2.5 mm 2.0 mm |
||||
Picture = right hand cutting version |
for Insert Type 105 |
Part number | d | l1 | h | l4 | f1 | *b |
B105.0010.S.03 | 10 | 80 | 9 | 50 | 4.3 | 5.9 |
B105.0012.S.03 | 12 | 80 | 11 | 50 | 4.3 | 5.9 |
B105.0016.S.03 | 16 | 80 | 14 | 50 | 4.3 | 5.9 |
B105.0020.S.03 | 20 | 90 | 18 | 55 | 4.3 | 5.9 |
B105.0025.S.03 | 25 | 100 | 23 | 55 | 5.9 | 5.9 |
B105.0010.S.04 | 10 | 80 | 9 | 50 | 4.3 | 6.4 |
B105.0012.S.04 | 12 | 80 | 11 | 50 | 4.9 | 6.4 |
B105.0016.S.04 | 16 | 80 | 14 | 50 | 4.9 | 6.4 |
B105.0020.S.04 | 20 | 90 | 18 | 55 | 4.9 | 6.4 |
B105.0025.S.04 | 25 | 100 | 23 | 55 | 6.4 | 6.4 |
B105.0010.S.05 | 10 | 80 | 9 | 50 | 4.3 | 7.0 |
B105.0012.S.05 | 12 | 80 | 11 | 50 | 6.3 | 7.0 |
B105.0016.S.05 | 16 | 80 | 14 | 50 | 6.3 | 7.0 |
B105.0020.S.05 | 20 | 90 | 18 | 55 | 6.3 | 7.0 |
B105.0020.S.05 | 20 | 90 | 18 | 55 | 6.3 | 7.0 |
Further sizes upon request | *b = Height of insert | Dimensions in mm | ||||
Ordering note: Toolholders can be used with right and left hand inserts. |
Spare Parts | |||
Toolholder | Clamp | TORX PLUS® Wrench | |
B105.00...S.03 | 010.0105.03 | T15PL | |
B105.00...S.04 | 010.0105.04 | T15PL | |
B105.00...S.05 | 010.0105.05 | T15PL |
|