Boring and Profiling  |
| Insert | 105 |
 |
|||
| Bore Ø from |
0.2 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N |
||||
| Part number | r | f | a | b | l2 | l5 | tmax | Dmin | Form |  |
 |
|
| R/L105.1802.0.02 | 0.02 | 1.0 | 0.17 | 5.9 | 1 | 23 | 0.02 | 0.2 | B | ▲/△ | △/△ | |
| R/L105.1802.0.03 | 0.02 | 1.0 | 0.25 | 5.9 | 1 | 23 | 0.02 | 0.3 | B | ▲/△ | △/△ | |
| R/L105.1802.0.05 | 0.05 | 1.0 | 0.40 | 5.9 | 2 | 23 | 0.05 | 0.5 | B | ▲/▲ | △/△ | |
| R/L105.1803.0.07 | 0.05 | 0.3 | 0.60 | 5.9 | 2 | 23 | 0.05 | 0.7 | A | ▲/▲ | △/△ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||||
| recommended |  uncoated grades |
K | ||||||||||
| alternative recommendation |  coated grades |
N | ||||||||||
| not suitable |  brazed / Cermet |
S | ||||||||||
| H | ||||||||||||
| Carbide grades | ||||||||||||
 |
|
 |