Boring and Profiling  |
| Insert | 105 |
 |
|||
| Bore Ø from |
0.2 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N |
||||
| Part number | f | a | b | l2 | l5 | tmax | Dmin |  |
 |
|
| R105.9013.000.0.02 | 1.3 | 0.17 | 5.9 | 1 | 23 | 0.015 | 0.2 | ▲ | ||
| R105.9013.000.0.03 | 1.3 | 0.25 | 5.9 | 1 | 23 | 0.015 | 0.3 | ▲ | ||
| R105.9013.000.0.05 | 1.3 | 0.40 | 5.9 | 2 | 23 | 0.020 | 0.5 | ▲ | ▲ | |
| R105.9013.000.0.07 | 1.3 | 0.60 | 5.9 | 2 | 23 | 0.020 | 0.7 | ▲ | ||
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||
| recommended |  uncoated grades |
K | ||||||||
| alternative recommendation |  coated grades |
N | ||||||||
| not suitable |  brazed / Cermet |
S | ||||||||
| H | ||||||||||
| Carbide grades | ||||||||||
 |
|
 |