Boring and Profiling

Insert 105
   
Bore Ø from
  		 
3.0 mm   
 		  

R = right hand version shown             L = left hand version
   for Toolholder
   Type H105
            HC105
            B105
            VDI
            B105C
            B105TS
            IR105
            962
            AIH
            963
            N

  Part number r f a d b l2 l5 tmax Dmin
  R/L105.1813.005.1.3 0.05 1.3 2.6 2.3 5.9 10 25 0.15 3   △/△ ▲/▲ △/ △/ /
  R/L105.1813.005.2.3 0.05 1.3 2.6 2.3 5.9 15 30 0.15 3   △/△ ▲/▲   / △/
  R/L105.1813.005.3.3 0.05 1.3 2.6 2.3 5.9 20 35 0.15 3   △/△ ▲/▲   △/ /
  R/L105.1813.01.1.3 0.10 1.3 2.6 2.3 5.9 10 25 0.15 3   △/△   ▲/▲ ▲/▲  
  R/L105.1813.01.2.3 0.10 1.3 2.6 2.3 5.9 15 30 0.15 3   △/△   ▲/▲ ▲/▲  
  R/L105.1813.01.3.3 0.10 1.3 2.6 2.3 5.9 20 35 0.15 3   △/△   ▲/▲ ▲/▲  
  R/L105.1813.1.3 0.20 1.3 2.6 2.3 5.9 10 25 0.15 3 ▲/▲ ▲/▲ △/ ▲/▲ ▲/▲ ▲/▲
  R/L105.1813.2.3 0.20 1.3 2.6 2.3 5.9 15 30 0.15 3 ▲/△ ▲/▲ △/ ▲/▲ ▲/▲ ▲/▲
  R/L105.1813.3.3 0.20 1.3 2.6 2.3 5.9 20 35 0.15 3 ▲/▲ ▲/▲ / ▲/▲ ▲/▲ ▲/▲
  R/L105.1819.005.1.4 0.05 1.9 3.7 2.9 6.4 10 25 0.30 4   △/△ ▲/▲ △/△ △/ /
  R/L105.1819.005.2.4 0.05 1.9 3.7 2.9 6.4 15 30 0.30 4   △/△ ▲/▲   / /
  R/L105.1819.005.3.4 0.05 1.9 3.7 2.9 6.4 20 35 0.30 4   △/△ ▲/▲ △/△   /
  R/L105.1819.1.4 0.20 1.9 3.7 2.9 6.4 10 25 0.30 4 ▲/▲ ▲/▲   ▲/▲ ▲/▲ ▲/▲
  R/L105.1819.2.4 0.20 1.9 3.7 2.9 6.4 15 30 0.30 4 ▲/▲ ▲/▲ △/ ▲/▲ ▲/▲ ▲/▲
  R/L105.1819.3.4 0.20 1.9 3.7 2.9 6.4 20 35 0.30 4 ▲/▲ ▲/▲ △/ ▲/▲ ▲/▲ ▲/▲
State R or L version Further sizes upon request           Dimensions in mm P
▲ on stock      △  4 weeks        upon request M
    recommended   uncoated grades K
    alternative recommendation   coated grades N
    not suitable   brazed / Cermet S
H
Carbide grades  




We reserve the right to make technical changes.