Boring and Profiling  |
| Insert | 105 |
 |
|||
| Bore Ø from |
5 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N |
||||
| Part number | r | f | a | d | b | l2 | l5 | tmax | Dmin |  |
|
| R105.9023.000.1.5 | - | 2.3 | 4.7 | 4 | 7 | 10 | 25 | 0.1 | 5 | ▲ | |
| R105.9023.000.3.5 | - | 2.3 | 4.7 | 4 | 7 | 20 | 35 | 0.1 | 5 | ▲ | |
| R105.9023.000.5.5 | - | 2.3 | 4.7 | 4 | 7 | 30 | 45 | 0.1 | 5 | ▲ | |
| R105.9023.003.1.5 | 0.03 | 2.3 | 4.7 | 4 | 7 | 10 | 25 | 0.1 | 5 | ▲ | |
| R105.9023.003.3.5 | 0.03 | 2.3 | 4.7 | 4 | 7 | 20 | 35 | 0.1 | 5 | ▲ | |
| R105.9023.003.5.5 | 0.03 | 2.3 | 4.7 | 4 | 7 | 30 | 45 | 0.1 | 5 | ▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||
| recommended |  uncoated grades |
K | |||||||||
| alternative recommendation |  coated grades |
N | |||||||||
| not suitable |  brazed / Cermet |
S | |||||||||
| H | |||||||||||
| Carbide grades | |||||||||||
 |
|
 |