Boring and Profiling  |
| Insert | 105 |
 |
|||
| Bore Ø from |
2.0 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N |
||||
| Part number | r | f | a | d | b | l2 | l5 | tmax | Dmin |  |
 |
 |
 |
 |
 |
 |
|
| R105.4715.005.1.2 | 0.05 | 1.5 | 1.9 | 1.45 | 5.9 | 9 | 25 | 0.3 | 2 | ▲ | ▲ | ||||||
| R105.4715.005.2.2 | 0.05 | 1.5 | 1.9 | 1.45 | 5.9 | 12 | 30 | 0.3 | 2 | ▲ | △ | ||||||
| R105.4713.005.1.3 | 0.05 | 1.3 | 2.6 | 2.00 | 5.9 | 10 | 25 | 0.4 | 3 | ▲ | ▲ | ▲ | |||||
| R105.4713.005.2.3 | 0.05 | 1.3 | 2.6 | 2.00 | 5.9 | 15 | 30 | 0.4 | 3 | ▲ | △ | ||||||
| R/L105.4719.1.4 | 0.15 | 1.9 | 3.7 | 2.90 | 6.4 | 10 | 25 | 0.6 | 4 | △/△ | ▲/▲ | ||||||
| R/L105.4719.3.4 | 0.15 | 1.9 | 3.7 | 2.90 | 6.4 | 20 | 35 | 0.6 | 4 | △/ | ▲/▲ | / | ▲/▲ | ▲/▲ | ▲/▲ | ||
| R/L105.4723.2.5 | 0.15 | 2.3 | 4.7 | 3.70 | 7.0 | 15 | 30 | 0.8 | 5 | △/△ | ▲/▲ | △/ | |||||
| R/L105.4723.4.5 | 0.15 | 2.3 | 4.7 | 3.70 | 7.0 | 25 | 40 | 0.8 | 5 | ▲/▲ | ▲/▲ | ▲/▲ | ▲/▲ | ||||
| R/L105.4733.3.6 | 0.15 | 3.3 | 5.7 | 3.70 | 7.0 | 20 | 35 | 1.8 | 6 | △/△ | ▲/▲ | ||||||
| R/L105.4733.5.6 | 0.15 | 3.3 | 5.7 | 3.70 | 7.0 | 30 | 45 | 1.8 | 6 | △/ | ▲/▲ | ▲/▲ | △/△ | ▲/▲ | |||
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||||||||
| recommended |  uncoated grades |
K | |||||||||||||||
| alternative recommendation |  coated grades |
N | |||||||||||||||
| not suitable |  brazed / Cermet |
S | |||||||||||||||
| H | |||||||||||||||||
| Carbide grades | |||||||||||||||||
 |
|
 |