Grooving (internal)  |
| Insert | 105 |
 |
|||
| Bore Ø from Full radius |
6.0 mm 0.5 - 1.0 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N  |
||||
| Part number | w | r | f | a | d | b | l2 | l5 | tmax | Dmin |  |
 |
 |
|
| R/L105.0005.2.6 | 1.0 | 0.50 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 1.8 | 6 | ▲/△ | ▲/▲ | ||
| R/L105.0007.2.6 | 1.5 | 0.75 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 1.8 | 6 | ▲/△ | ▲/▲ | ||
| R/L105.0010.2.6 | 2.0 | 1.00 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 1.8 | 6 | ▲/△ | ▲/▲ | ||
| R/L105.0005.4.6 | 1.0 | 0.50 | 3.3 | 5.7 | 3.7 | 7 | 25 | 40 | 1.8 | 6 | ▲/△ | ▲/▲ | ||
| R/L105.0007.4.6 | 1.5 | 0.75 | 3.3 | 5.7 | 3.7 | 7 | 25 | 40 | 1.8 | 6 | ▲/△ | ▲/▲ | ||
| R/L105.0010.4.6 | 2.0 | 1.00 | 3.3 | 5.7 | 3.7 | 7 | 25 | 40 | 1.8 | 6 | △/▲ | ▲/▲ | ||
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||||||
| recommended |  uncoated grades |
K | ||||||||||||
| alternative recommendation |  coated grades |
N | ||||||||||||
| not suitable |  brazed / Cermet |
S | ||||||||||||
| H | ||||||||||||||
| Carbide grades | ||||||||||||||
 |
|
 |