Threading (internal) Partial profile |
| Insert | 105 |
 |
|||
| Bore Ø from Pitch |
3.0 mm P 0.35 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N  |
||||
| Part number | P | E | f | a | d | b | l2 | l5 | Dmin |  |
 |
|
| R/L105.0203.1.3 | 0.35 | 0.3 | 1.4 | 2.7 | 2.1 | 5.9 | 10 | 25 | 3 | ▲/△ | ▲/△ | |
| R/L105.0203.2.5 | 0.35 | 0.3 | 2.3 | 4.7 | 3.5 | 7.0 | 15 | 30 | 5 | ▲/△ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||||
| recommended |  uncoated grades |
K | ||||||||||
| alternative recommendation |  coated grades |
N | ||||||||||
| not suitable |  brazed / Cermet |
S | ||||||||||
| H | ||||||||||||
| Carbide grades | ||||||||||||
 |
|
 |