Threading (internal) Partial profile |
| Insert | 105 |
 |
|||
| Bore Ø from Pitch |
3.0 mm P 0.50 - 0.75 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N  |
||||
| Part number | P | Pmax | E | f | a | d | b | l2 | l5 | Dmin |  |
 |
 |
|
| R/L105.0407.2.3 | 0.5 | 0.75 | 0.45 | 1.4 | 2.7 | 2.0 | 5.9 | 15 | 30 | 3 | ▲/△ | ▲/△ | ||
| R/L105.0407.1.4 | 0.5 | 0.75 | 0.45 | 1.9 | 3.7 | 2.7 | 6.4 | 10 | 25 | 4 | ▲/△ | ▲/△ | ||
| R/L105.0407.2.4 | 0.5 | 0.75 | 0.45 | 1.9 | 3.7 | 2.7 | 6.4 | 15 | 30 | 4 | ▲/△ | ▲/△ | ||
| R/L105.0407.3.4 | 0.5 | 0.75 | 0.45 | 1.9 | 3.7 | 2.7 | 6.4 | 20 | 35 | 4 | ▲/△ | ▲/△ | ||
| R/L105.0407.2.5 | 0.5 | 0.75 | 0.45 | 2.3 | 4.7 | 3.5 | 7.0 | 15 | 30 | 5 | ▲/▲ | ▲/△ | ▲/▲ | |
| R/L105.0407.3.5 | 0.5 | 0.75 | 0.45 | 2.3 | 4.7 | 3.5 | 7.0 | 20 | 35 | 5 | △/△ | ▲/△ | ||
| R/L105.0407.4.5 | 0.5 | 0.75 | 0.45 | 2.3 | 4.7 | 3.5 | 7.0 | 25 | 40 | 5 | ▲/△ | ▲/△ | ||
| R/L105.0407.3.6 | 0.5 | 0.75 | 0.45 | 3.3 | 5.7 | 4.7 | 7.0 | 20 | 35 | 6 | ▲/△ | ▲/△ | ||
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||||||
| recommended |  uncoated grades |
K | ||||||||||||
| alternative recommendation |  coated grades |
N | ||||||||||||
| not suitable |  brazed / Cermet |
S | ||||||||||||
| H | ||||||||||||||
| Carbide grades | ||||||||||||||
 |
|
 |