Threading (internal) Partial profile |
| Insert | 105 |
 |
|||
| Bore Ø from Pitch |
4.8 mm P 1.0 - 1.5 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N  |
||||
| Part number | P | Pmax | E | f | a | d | b | l2 | l5 | Dmin |  |
 |
 |
 |
 |
 |
|
| R/L105.0510.2.5 | 1.00 | 1.00 | 0.55 | 2.1 | 4.5 | 3.5 | 7 | 15 | 30 | 4.8 | ▲/△ | ▲/▲ | ▲/▲ | △/ | ▲/▲ | ||
| R/L105.0510.3.5 | 1.00 | 1.00 | 0.55 | 2.1 | 4.5 | 3.5 | 7 | 20 | 35 | 4.8 | ▲/△ | ▲/△ | |||||
| R/L105.0510.4.5 | 1.00 | 1.00 | 0.55 | 2.1 | 4.5 | 3.5 | 7 | 25 | 40 | 4.8 | ▲/△ | ▲/▲ | |||||
| R/L105.0510.2.6 | 1.00 | 1.00 | 0.55 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6.0 | ▲/▲ | ▲/▲ | ▲/▲ | ||||
| R/L105.0612.2.6 | 1.25 | 1.25 | 0.65 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6.0 | △/△ | ▲/▲ | ▲/▲ | ▲/▲ | |||
| R/L105.0612.3.6 | 1.25 | 1.25 | 0.65 | 3.3 | 5.7 | 3.7 | 7 | 20 | 35 | 6.0 | ▲/△ | ▲/▲ | |||||
| R/L105.0612.4.6 | 1.25 | 1.25 | 0.65 | 3.3 | 5.7 | 3.7 | 7 | 25 | 40 | 6.0 | ▲/△ | ▲/▲ | |||||
| R/L105.0815.2.7 | 1.50 | 1.50 | 0.75 | 4.0 | 6.4 | 3.7 | 7 | 15 | 30 | 7.0 | ▲/△ | △/ | ▲/▲ | ▲/▲ | |||
| R/L105.0815.3.7 | 1.50 | 1.50 | 0.75 | 4.0 | 6.4 | 3.7 | 7 | 20 | 35 | 7.0 | ▲/△ | ▲/▲ | |||||
| R/L105.0815.4.7 | 1.50 | 1.50 | 0.75 | 4.0 | 6.4 | 3.7 | 7 | 25 | 40 | 7.0 | ▲/△ | ▲/▲ | |||||
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||||||||
| recommended |  uncoated grades |
K | |||||||||||||||
| alternative recommendation |  coated grades |
N | |||||||||||||||
| not suitable |  brazed / Cermet |
S | |||||||||||||||
| H | |||||||||||||||||
| Carbide grades | |||||||||||||||||
 |
|
 |