Threading (internal) Partial profile |
| Insert | 105 |
 |
|||
| Bore Ø from Pitch |
2.4 mm P 0.5 - 1.25 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N  |
||||
| Part number | P | E | f | a | d | b | l2 | l5 | Dmin |  |
 |
|
| R/L105.VPM3.2.3 | 0.50 | 0.3 | 1.4 | 2.2 | 1.65 | 5.9 | 9 | 25 | 2.4 | ▲/△ | ▲/△ | |
| R/L105.VPM3.4.3 | 0.50 | 0.3 | 1.4 | 2.2 | 1.65 | 5.9 | 16 | 35 | 2.4 | ▲/△ | ▲/△ | |
| R/L105.VPM4.2.4 | 0.70 | 0.4 | 1.5 | 2.9 | 2.10 | 6.4 | 15 | 30 | 3.2 | ▲/△ | ▲/△ | |
| R/L105.VPM4.3.4 | 0.70 | 0.4 | 1.5 | 2.9 | 2.10 | 6.4 | 20 | 35 | 3.2 | ▲/△ | ▲/△ | |
| R/L105.VPM5.2.5 | 0.80 | 0.5 | 2.0 | 3.7 | 2.80 | 7.0 | 15 | 30 | 4.1 | ▲/△ | ▲/▲ | |
| R/L105.VPM5.4.5 | 0.80 | 0.5 | 2.0 | 3.7 | 2.80 | 7.0 | 25 | 40 | 4.1 | ▲/△ | ▲/△ | |
| R/L105.VPM6.3.6 | 1.00 | 0.5 | 2.4 | 4.5 | 3.40 | 7.0 | 20 | 35 | 4.9 | ▲/▲ | ▲/▲ | |
| R/L105.VPM6.4.6 | 1.00 | 0.5 | 2.4 | 4.5 | 3.40 | 7.0 | 25 | 40 | 4.9 | ▲/△ | ▲/△ | |
| R/L105.VPM6.5.6 | 1.00 | 0.5 | 2.4 | 4.5 | 3.40 | 7.0 | 30 | 45 | 4.9 | ▲/△ | ▲/△ | |
| R/L105.VPM8.3.8 | 1.25 | 0.7 | 3.8 | 6.2 | 4.70 | 7.0 | 20 | 35 | 6.6 | ▲/△ | ▲/▲ | |
| R/L105.VPM8.5.8 | 1.25 | 0.7 | 3.8 | 6.2 | 4.70 | 7.0 | 30 | 45 | 6.6 | ▲/△ | ▲/△ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||||
| recommended |  uncoated grades |
K | ||||||||||
| alternative recommendation |  coated grades |
N | ||||||||||
| not suitable |  brazed / Cermet |
S | ||||||||||
| H | ||||||||||||
| Carbide grades | ||||||||||||
 |
|
 |