Threading (internal) Partial profile |
| Insert | 105 |
 |
|||
| Bore Ø from Threads per inch |
4.0 mm 16 - 40 |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N  |
||||
| Part number | TPImin | TPImax | E | f | a | d | b | l2 | l5 | Dmin |  |
 |
 |
 |
 |
 |
|
| R/L105.3240.2.4 | 32 | 40 | 0.45 | 1.9 | 3.7 | 2.7 | 6.4 | 15 | 30 | 4 | ▲/△ | / | △/ | ▲/▲ | |||
| R/L105.1620.2.5 | 16 | 20 | 0.70 | 2.3 | 4.7 | 3.3 | 7.0 | 15 | 30 | 5 | ▲/△ | ▲/△ | |||||
| R/L105.1620.3.5 | 16 | 20 | 0.70 | 2.3 | 4.7 | 3.3 | 7.0 | 20 | 35 | 5 | △/△ | ▲/△ | |||||
| R/L105.2428.2.5 | 24 | 28 | 0.55 | 2.3 | 4.7 | 3.5 | 7.0 | 15 | 30 | 5 | ▲/△ | / | △/ | ▲/▲ | |||
| R/L105.3240.2.5 | 32 | 40 | 0.45 | 2.3 | 4.7 | 3.5 | 7.0 | 15 | 30 | 5 | ▲/△ | △/ | △/ | ▲/△ | |||
| R/L105.1620.2.6 | 16 | 20 | 0.70 | 3.3 | 5.7 | 3.7 | 7.0 | 15 | 30 | 6 | ▲/▲ | △/ | △/ | △/ | ▲/▲ | ||
| R/L105.1620.3.6 | 16 | 20 | 0.70 | 3.3 | 5.7 | 3.7 | 7.0 | 20 | 35 | 6 | ▲/△ | ▲/△ | |||||
| R/L105.1620.4.6 | 16 | 20 | 0.70 | 3.3 | 5.7 | 3.7 | 7.0 | 25 | 40 | 6 | ▲/△ | ▲/△ | |||||
| R/L105.2428.2.6 | 24 | 28 | 0.55 | 3.3 | 5.7 | 3.7 | 7.0 | 15 | 30 | 6 | △/ | ▲/▲ | △/ | ▲/▲ | |||
| R/L105.2428.3.6 | 24 | 28 | 0.55 | 3.3 | 5.7 | 3.7 | 7.0 | 20 | 35 | 6 | ▲/△ | ▲/△ | |||||
| R/L105.2428.4.6 | 24 | 28 | 0.55 | 3.3 | 5.7 | 3.7 | 7.0 | 25 | 40 | 6 | ▲/△ | ▲/▲ | |||||
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||||||||
| recommended |  uncoated grades |
K | |||||||||||||||
| alternative recommendation |  coated grades |
N | |||||||||||||||
| not suitable |  brazed / Cermet |
S | |||||||||||||||
| H | |||||||||||||||||
| Carbide grades | |||||||||||||||||
 |
|
 |