Threading (internal) Full profile |
Insert | 105 Whitworth thread |
||||
Bore Ø from Threads per inch |
4 mm 20 - 28 |
||||
R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N |
Part number | TPI | E | f | a | d | b | l2 | l5 | Dmin | |||
R105.5520.2.4 | 20 | 1.0 | 1.9 | 3.7 | 2.5 | 6.4 | 15 | 30 | 4 | ▲ | ▲ | |
R/L105.5524.2.5 | 24 | 0.8 | 2.3 | 4.7 | 3.5 | 7.0 | 15 | 30 | 5 | △/△ | △/△ | |
R/L105.5526.2.5 | 26 | 0.8 | 2.3 | 4.7 | 3.5 | 7.0 | 15 | 30 | 5 | △/△ | ▲/△ | |
R/L105.5528.2.5 | 28 | 0.8 | 2.3 | 4.7 | 3.5 | 7.0 | 15 | 30 | 5 | ▲/△ | ▲/△ | |
State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||
▲ on stock △ 4 weeks upon request | M | |||||||||||
recommended | uncoated grades | K | ||||||||||
alternative recommendation | coated grades | N | ||||||||||
not suitable | brazed / Cermet | S | ||||||||||
H | ||||||||||||
Carbide grades |
|