Threading (internal) Full profile |
| Insert | 105 Whitworth thread |
 |
|||
| Bore Ø from Threads per inch |
6 mm 19 - 28 |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N  |
||||
△ △
| Part number | TPI | E | f | a | d | b | l2 | l5 | Dmin |  |
 |
 |
|
| R/L105.5524.2.6 | 24 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6 | △/△ | ▲/△ | ||
| R/L105.5526.2.6 | 26 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6 | △/△ | ▲/△ | ||
| R/L105.5528.2.6 | 28 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6 | ▲/△ | ▲/△ | ||
| R/L105.5519.2.6 | 19 | 1.0 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6 | ▲/△ | △/ | ▲/▲ | |
| R/L105.5520.2.6 | 20 | 1.0 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6 | △/△ | ▲/△ | ||
| R/L105.5522.2.6 | 22 | 1.0 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6 | △/△ | △/△ | ||
| R105.5524.3.6 | 24 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 20 | 35 | 6 | △ | △ | ||
| R105.5526.3.6 | 26 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 20 | 35 | 6 | △ | △ | ||
| R/L105.5528.3.6 | 28 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 20 | 35 | 6 | ▲/△ | ▲/△ | ||
| R105.5519.3.6 | 19 | 1.0 | 3.3 | 5.7 | 3.7 | 7 | 20 | 35 | 6 | ▲ | ▲ | ||
| R105.5522.3.6 | 22 | 1.0 | 3.3 | 5.7 | 3.7 | 7 | 20 | 35 | 6 | △ | △ | ||
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||||
| recommended |  uncoated grades |
K | |||||||||||
| alternative recommendation |  coated grades |
N | |||||||||||
| not suitable |  brazed / Cermet |
S | |||||||||||
| H | |||||||||||||
| Carbide grades | |||||||||||||
 |
|
 |