Threading (internal) Partial profile |
| Insert | 105 |
 |
|||
| Bore Ø from Threads per inch |
6.0 mm 18 - 27 |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N  |
||||
| Part number | TPI | E | f | a | d | b | l2 | l5 | Dmin |  |
 |
 |
 |
 |
|
| R/L105.NP18.2.6 | 18 | 1.0 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6 | △/△ | ▲/△ | △/△ | ▲/▲ | ||
| R/L105.NP18.3.6 | 18 | 1.0 | 3.3 | 5.7 | 3.7 | 7 | 20 | 35 | 6 | △/△ | △/△ | ▲/△ | |||
| R/L105.NP18.4.6 | 18 | 1.0 | 3.3 | 5.7 | 3.7 | 7 | 25 | 40 | 6 | △/△ | △/△ | △/△ | |||
| R/L105.NP27.2.6 | 27 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 15 | 30 | 6 | ▲/△ | △/△ | ▲/△ | |||
| R/L105.NP27.3.6 | 27 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 20 | 35 | 6 | △/△ | △/△ | △/△ | △/△ | ||
| R/L105.NP27.4.6 | 27 | 0.8 | 3.3 | 5.7 | 3.7 | 7 | 25 | 40 | 6 | △/△ | △/△ | △/△ | |||
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||||||
| recommended |  uncoated grades |
K | |||||||||||||
| alternative recommendation |  coated grades |
N | |||||||||||||
| not suitable |  brazed / Cermet |
S | |||||||||||||
| H | |||||||||||||||
| Carbide grades | |||||||||||||||
 |
|
 |