Face Grooving |
| Insert | 105 |
 |
|||
| from outer groove Ø Depth of groove Width of groove up to |
6 mm 5 mm 2 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type H105 HC105 B105 VDI B105C B105TS IR105 962 AIH 963 N |
||||
| Part number | w | r | f | b | l2 | l5 | tmaxa | Damin |  |
 |
 |
|
| R/L105.0610.1.8 | 1.0 | 0.05 | 2 | 7 | 10 | 25 | 2 | 6 | ▲/△ | ▲/▲ | ▲/▲ | |
| R/L105.0615.1.8 | 1.5 | 0.05 | 2 | 7 | 10 | 25 | 3 | 6 | ▲/△ | ▲/▲ | ▲/▲ | |
| R/L105.0620.1.8 | 2.0 | 0.05 | 2 | 7 | 10 | 25 | 5 | 6 | ▲/△ | ▲/▲ | ▲/▲ | |
| R/L105.0610.2.8 | 1.0 | 0.05 | 2 | 7 | 15 | 35 | 2 | 6 | △/△ | ▲/△ | ▲/△ | |
| R/L105.0615.2.8 | 1.5 | 0.05 | 2 | 7 | 15 | 35 | 3 | 6 | ▲/△ | ▲/△ | ▲/▲ | |
| R/L105.0620.2.8 | 2.0 | 0.05 | 2 | 7 | 15 | 35 | 5 | 6 | ▲/△ | ▲/▲ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||||
| recommended |  uncoated grades |
K | ||||||||||
| alternative recommendation |  coated grades |
N | ||||||||||
| not suitable |  brazed / Cermet |
S | ||||||||||
| H | ||||||||||||
| Carbide grades | ||||||||||||
 |
|
 |