Face Grooving |
| Insert | 105 |
 |
|||
| from outer groove Ø Depth of groove Width of groove up to |
10 mm 15 mm 2-3 mm |
||||
 L = left hand version shown R = right hand version |
for Toolholder Type B105...12.2 |
||||
| Part number | w | r | f | l5 | tmaxa | Damin |  |
 |
|
| R/LA105.1020.2.2 | 2.0 | 0.1 | 1.4 | 40 | 15 | 10 | ▲/▲ | ▲/▲ | |
| R/LA105.1025.2.2 | 2.5 | 0.1 | 1.6 | 40 | 15 | 10 | ▲/▲ | ▲/▲ | |
| R/LA105.1030.2.2 | 3.0 | 0.1 | 1.0 | 40 | 15 | 10 | ▲/▲ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||
| recommended |  uncoated grades |
K | |||||||
| alternative recommendation |  coated grades |
N | |||||||
| not suitable |  brazed / Cermet |
S | |||||||
| Note: | H | ||||||||
| Use insert RA105 in toolholder RB105...12.2 use insert LA105 in toolholder LB105...12.2. | Carbide grades | ||||||||
| Face grooving with full width of the full depth only possible between Damin 10 - 40 mm ! | |||||||||
 |
|
 |