Face Grooving |
Insert | 105 |
||||
from outer groove Ø Depth of groove Width of groove up to |
10 mm 15 mm 2-3 mm |
||||
L = left hand version shown R = right hand version |
for Toolholder Type B105...12.2 |
Part number | w | r | f | l5 | tmaxa | Damin | |||
R/LA105.1020.10.2.2 | 2.0 | 1.00 | 1.4 | 40 | 15 | 10 | ▲/△ | ▲/▲ | |
R/LA105.1025.12.2.2 | 2.5 | 1.25 | 1.6 | 40 | 15 | 10 | △/△ | ▲/▲ | |
R/LA105.1030.15.2.2 | 3.0 | 1.50 | 1.9 | 40 | 15 | 10 | ▲/△ | ▲/▲ | |
State R or L version | Further sizes upon request Dimensions in mm | P | |||||||
▲ on stock △ 4 weeks upon request | M | ||||||||
recommended | uncoated grades | K | |||||||
alternative recommendation | coated grades | N | |||||||
not suitable | brazed / Cermet | S | |||||||
Note: | H | ||||||||
Use insert RA105 in toolholder RB105...12.2 use insert LA105 in toolholder LB105...12.2. | Carbide grades | ||||||||
Face grooving with full width of the full depth only possible between Damin 10 - 40 mm ! |
|