Grooving (internal) |
Insert | 106 |
||||
Bore Ø from Depth of groove Width of groove up to |
6.5 mm 0.8 mm 1.5 mm |
||||
R = right hand version shown L = left hand version |
for Toolholder Type B106 |
Part number | w | s | f | a | d | tmax | Dmin | |||
R/L106.0070.2.00 | 0.74 | 2.8 | 3.7 | 5.9 | 4.4 | 0.8 | 6.5 | ▲/△ | ▲/△ | |
R/L106.0100.2.00 | 1.00 | 2.8 | 3.7 | 5.9 | 4.4 | 0.8 | 6.5 | △/△ | ▲/△ | |
R/L106.0150.2.00 | 1.50 | 2.8 | 3.7 | 5.9 | 4.4 | 0.8 | 6.5 | △/△ | ▲/▲ | |
State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||
▲ on stock △ 4 weeks upon request | M | |||||||||
recommended | uncoated grades | K | ||||||||
alternative recommendation | coated grades | N | ||||||||
not suitable | brazed / Cermet | S | ||||||||
Note: | H | |||||||||
Use right hand inserts in right hand toolholders and left hand inserts in left hand toolholders | Carbide grades |
|