Boring and Profiling |
| Insert | 106 |
 |
|||
| Bore Ø from |
6 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B106 |
||||
| Part number | s | f | a | r | d | Dmin |  |
 |
|
| R/L106.1831.1.005 | 2.8 | 3.2 | 5.4 | 0.05 | 4.4 | 6 | ▲/△ | ▲/▲ | |
| R/L106.1831.1.02 | 2.8 | 3.2 | 5.4 | 0.20 | 4.4 | 6 | ▲/△ | ▲/▲ | |
| R/L106.1831.1.04 | 2.8 | 3.2 | 5.4 | 0.40 | 4.4 | 6 | ▲/△ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||
| recommended |  uncoated grades |
K | |||||||
| alternative recommendation |  coated grades |
N | |||||||
| not suitable |  brazed / Cermet |
S | |||||||
| Note: | H | ||||||||
| Use right hand inserts in right hand toolholders and left hand inserts in left hand toolholders | Carbide grades | ||||||||
 |
|
 |