Grooving (internal) |
| Insert | 107 |
 |
|||
| Bore Ø from Depth of groove Width of groove up to |
7 mm 1 mm 1.5 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B107 |
||||
| Part number | w | s | f | a | d | tmax | Dmin |  |
 |
|
| R/L107.0100.1.00 | 1.0 | 3.3 | 4 | 6.6 | 5.2 | 1 | 7 | ▲/△ | ▲/▲ | |
| R/L107.0150.1.00 | 1.5 | 3.3 | 4 | 6.6 | 5.2 | 1 | 7 | ▲/△ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||
| recommended |  uncoated grades |
K | ||||||||
| alternative recommendation |  coated grades |
N | ||||||||
| not suitable |  brazed / Cermet |
S | ||||||||
| H | ||||||||||
| Carbide grades | ||||||||||
 |
|
 |