Boring and Profiling |
| Insert | 107 |
 |
|||
| Bore Ø from |
6.8 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B107 |
||||
| Part number | s | f | a | r | d | Dmin |  |
 |
|
| R/L107.1837.02 | 3.3 | 3.7 | 6.3 | 0.2 | 5.2 | 6.8 | ▲/▲ | ▲/▲ | |
| R/L107.1837.04 | 3.3 | 3.7 | 6.3 | 0.4 | 5.2 | 6.8 | ▲/▲ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||
| recommended |  uncoated grades |
K | |||||||
| alternative recommendation |  coated grades |
N | |||||||
| not suitable |  brazed / Cermet |
S | |||||||
| Note: | H | ||||||||
| The modified geometry allows boring of bores ≥ Ø 6.8 mm and profiling of reliefs as per DIN 509 form E and F. | Carbide grades | ||||||||
 |
|
 |