Chamfering and backboring (internal) |
| Insert | 107 |
 |
|||
| Bore Ø from Depth of cut up to |
6.8 mm 0.8 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B107 |
||||
| Part number | s | f | a | r | E | d | tmax | Dmin |  |
 |
|
| R/L107.4545.1.02 | 2.2 | 3.5 | 3.8 | 6.4 | 0.2 | 5.2 | 0.8 | 6.8 | ▲/△ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||
| recommended |  uncoated grades |
K | |||||||||
| alternative recommendation |  coated grades |
N | |||||||||
| not suitable |  brazed / Cermet |
S | |||||||||
| H | |||||||||||
| Carbide grades | |||||||||||
 |
|
 |