Threading (internal) Partial profile |
| Insert | 107 |
 |
|||
| Bore Ø from Pitch |
7 mm 0.5-1.75 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B107  |
||||
| Part number | P | Pmax | E | f | a | d | s | Dmin |  |
 |
|
| R/L107.0205.1.01 | 0.5 | 0.75 | 3.0 | 4 | 6.6 | 5.2 | 3.5 | 7 | △/△ | ▲/▲ | |
| R/L107.0510.1.01 | 1.0 | 1.25 | 2.8 | 4 | 6.6 | 5.2 | 3.5 | 7 | ▲/△ | ▲/▲ | |
| R/L107.0815.1.01 | 1.5 | 1.75 | 2.6 | 4 | 6.6 | 5.2 | 3.5 | 7 | ▲/△ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||
| recommended |  uncoated grades |
K | |||||||||
| alternative recommendation |  coated grades |
N | |||||||||
| not suitable |  brazed / Cermet |
S | |||||||||
| H | |||||||||||
| Carbide grades | |||||||||||
 |
|
 |