NC-Profiling (internal) |
| Insert | 108 |
 |
|||
| Bore Ø from Depth of groove |
8 mm 1 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B108 |
||||
| Part number | w | s | f | a | r | d | tmax | Dmin |  |
 |
 |
 |
 |
|
| R/L108.0150.02 | 1.5 | 3.2 | 4.8 | 7.8 | 0.2 | 6 | 1 | 8 | ▲/▲ | ▲/▲ | ▲/▲ | ▲/△ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||||||
| recommended |  uncoated grades |
K | ||||||||||||
| alternative recommendation |  coated grades |
N | ||||||||||||
| not suitable |  brazed / Cermet |
S | ||||||||||||
| H | ||||||||||||||
| Carbide grades | ||||||||||||||
 |
|
 |