Grooving (internal) |
| Insert | S108 |
 |
|||
| Bore Ø from Depth of groove up to Width of groove |
8 mm 1 mm 1-2 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B108  |
||||
| Part number | w | s | f | a | r | d | tmax | Dmin |  |
 |
|
| R/LS108.0100.D1 | 1.0 | 3.2 | 4.8 | 7.8 | 0.1 | 6 | 1 | 8 | ▲/△ | ▲/▲ | |
| R/LS108.0150.D1 | 1.5 | 3.2 | 4.8 | 7.8 | 0.1 | 6 | 1 | 8 | ▲/△ | ▲/△ | |
| R/LS108.0200.D2 | 2.0 | 3.2 | 4.8 | 7.8 | 0.2 | 6 | 1 | 8 | ▲/△ | ▲/△ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||
| recommended |  uncoated grades |
K | |||||||||
| alternative recommendation |  coated grades |
N | |||||||||
| not suitable |  brazed / Cermet |
S | |||||||||
| H | |||||||||||
| Carbide grades | |||||||||||
 |
|
 |