Chamfering and backboring (internal) |
| Insert | 108 |
 |
|||
| Bore Ø from Depth of cut up to |
7.8 mm 1.4 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B108 |
||||
| Part number | E | s | f | a | d | r | tmax | Dmin |  |
 |
 |
 |
|
| R/L108.4545.02 | 1.8 | 3.6 | 4.65 | 7.65 | 6 | 0.2 | 1.4 | 7.8 | ▲/▲ | ▲/△ | ▲/△ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||||
| recommended |  uncoated grades |
K | |||||||||||
| alternative recommendation |  coated grades |
N | |||||||||||
| not suitable |  brazed / Cermet |
S | |||||||||||
| H | |||||||||||||
| Carbide grades | |||||||||||||
 |
|
 |