Pregrooving and chamfering (internal) |
Insert | 108 |
||||
Bore Ø from |
8 mm |
||||
R = right hand version shown L = left hand version |
for Toolholder Type B108 |
Part number | w | s | f | a | d | tmax | t1 | Dmin | |||||
R/L108.0810.45 | 1 | 3.2 | 4.8 | 7.8 | 6 | 1.5 | 0.2 | 8 | ▲/△ | ▲/▲ | ▲/▲ | ▲/▲ | |
State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||||
▲ on stock △ 4 weeks upon request | M | ||||||||||||
recommended | uncoated grades | K | |||||||||||
alternative recommendation | coated grades | N | |||||||||||
not suitable | brazed / Cermet | S | |||||||||||
H | |||||||||||||
Carbide grades |
|