Threading (internal) Partial profile |
| Insert | 108 |
 |
|||
| Bore Ø from Pitch |
8 mm 1.5-1.75 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B108  |
||||
| Part number | P | Pmax | E | f | a | d | s | Dmin |  |
 |
 |
 |
|
| R/L108.0815.01 | 1.5 | 1.75 | 2.6 | 4.8 | 7.8 | 6 | 3.6 | 8 | ▲/▲ | ▲/▲ | ▲/▲ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | |||||||||||
| ▲ on stock △ 4 weeks upon request | M | ||||||||||||
| recommended |  uncoated grades |
K | |||||||||||
| alternative recommendation |  coated grades |
N | |||||||||||
| not suitable |  brazed / Cermet |
S | |||||||||||
| H | |||||||||||||
| Carbide grades | |||||||||||||
 |
|
 |