Threading (internal) Partial profile |
| Insert | 108 |
 |
|||
| Bore Ø from Pitch |
8 mm 0.5-1.25 mm |
||||
 R = right hand version shown L = left hand version |
for Toolholder Type B108  |
||||
| Part number | P | Pmax | E | f | a | d | s | Dmin |  |
 |
 |
 |
 |
|
| R/L108.0205.01 | 0.5 | 0.75 | 2.8 | 4.8 | 7.8 | 6 | 3.6 | 8 | ▲/△ | ▲/▲ | ▲/△ | ▲/▲ | ||
| R/L108.0510.01 | 1.0 | 1.25 | 2.8 | 4.8 | 7.8 | 6 | 3.6 | 8 | ▲/△ | ▲/▲ | ▲/▲ | ▲/△ | ▲/▲ | |
| State R or L version | Further sizes upon request Dimensions in mm | P | ||||||||||||
| ▲ on stock △ 4 weeks upon request | M | |||||||||||||
| recommended |  uncoated grades |
K | ||||||||||||
| alternative recommendation |  coated grades |
N | ||||||||||||
| not suitable |  brazed / Cermet |
S | ||||||||||||
| H | ||||||||||||||
| Carbide grades | ||||||||||||||
 |
|
 |