| HAM 297 | HAM 298 | HAM 299 | HAM 294 | HAM 296 |
 |
| HAM 30-1960 (HAM 297 Multidrill) solid carbide drill 3 X D |
Engineering data
• 4-facet ground • straight fluted • for machining of short chipping materials |
 |
| Material |  |
 |
 |
 |
 |
 |
 |
||||
| 30-1960 | |||||||||||
| 30-1961 | very suitable | limited suitable | |||||||||
 cutting materialsolid carbide ultra micro grain |
 number of teeth - 2 |
 helix angle 0° |
 HAM Standard |
 3 x Diameter |
 HAM Standard |
 Point angle 140° |
 Shank HA with IC |
 Interior Coolant |
 High Performance Cutting |
 Shrink Fit |
 Shank HB with IC |
 Shank HE with IC |
| Ø d1 (m7) mm |
l3 mm |
l2 mm |
l1 mm |
Ø d2 (h6) mm |
Ø d1 (m7) mm |
l3 mm |
l2 mm |
l1 mm |
Ø d2 (h6) mm |
|
| 4 | 17 | 24 | 66 | 6 | 10 | 35 | 47 | 89 | 10 | |
| 4.2 | 17 | 24 | 66 | 6 | 10.2 | 40 | 55 | 102 | 12 | |
| 5 | 20 | 28 | 66 | 6 | 10.5 | 40 | 55 | 102 | 12 | |
| 6 | 20 | 28 | 66 | 6 | 11 | 40 | 55 | 102 | 12 | |
| 6.8 | 24 | 34 | 79 | 8 | 12 | 40 | 55 | 102 | 12 | |
| 7 | 24 | 34 | 79 | 8 | 14 | 43 | 60 | 107 | 14 | |
| 8 | 29 | 41 | 79 | 8 | 16 | 45 | 65 | 115 | 16 | |
| 8.5 | 35 | 47 | 89 | 10 | 18 | 51 | 73 | 123 | 18 | |
| 9 | 35 | 47 | 89 | 10 | 20 | 55 | 79 | 131 | 20 |
We reserve the right to make technical changes. 