HAM 40-5350

HAM 40-5350 solid carbide roughing end mill

Engineering data
• special geometry with unequal helix,
without knurling contour
• for roughing with extremely high feed
• high chipping volume (up to 1.5 x D)
• very smooth running and very little
vibrations during machining
• cutting area geometrical balanced

corner chamfer	d1	b
	≤ Ø 5 ≥ Ø 6	0.10 0.20

Material
40-5350 / 40-5351								very suitable		limited suitable

cutting material solid carbide ultra micro grain	number of teeth - 3	helix angle 45° right hand fluted	HAM Standard	Type for soft materials	Machining Direction	cylindrical shank acc. DIN
Special-polishing process	High Speed Cutting	High Performance Cutting	Shrink Fit	Clamping Fixture Weldon

Ø d1 (h6) mm	l2 mm	l3 mm	Ø d3 (Hals) mm	l1 mm	Ø d2 (h6) mm	Ø d1 (h6) mm	l2 mm	l3 mm	Ø d3 (Hals) mm	l1 mm	Ø d2 (h6) mm
3	8	12	2.8	57	6	10	22	60	9.7	100	10
4	11	18	3.8	57	6	12	26	36	11.7	83	12
5	13	18	4.8	57	6	12	26	73	11.7	120	12
6	13	18	5.8	57	6	16	32	42	15.6	92	16
6	13	42	5.8	80	6	16	32	100	15.6	150	16

8	19	25	7.7	63	8	20	38	52	19.6	104	20
8	19	62	7.7	100	8	20	38	100	19.6	150	20
10	22	30	9.7	72	10

  Application example

  material:        Al Mg Si1
  tool:               HPC / HSC roughing end mill Ø 10.0 mm
  tool holder:   shrink fit

  cutting data:

  v_c = 565 m/min      v_f = 10000 mm/min       a_p = 10 mm
  f_z = 0.190 mm        n = 18000 rev /min        a_e = 10 mm

We reserve the right to make technical changes.